Once the fixtures were taken apart, each frame was individually inspected for structural damage and defect. All frames that are missing rivots, have bent components, or that are missing components such as tabs to hold glass, will be repaired or will have components replicated. Most structural issues appear to be on the top and the bottom spear portions of the fixtures, where there are twisted and bent, and require straightening. Some of the fixtures frames are bent and have missing rivots which hold the fixtures together, all of which will be straightened and replaced.
Pictured on the left is a typical fixture needed structural repair. They have the bent upper and lower spears as well as twisted frames. One the right is the same frame as it undergoes the structural repair process of this project.

Leave a comment